AEG KVH 32 Betriebsanweisung PDF herunterladen (Seite 31)

3. Type @DEBUGON then press Enter.

4. Type the following command (see the Key below)

then press Enter.

@SATCONFIG,X,N,F,S,C,ID,P,B,D

Key: @SATCONFIG = directs data to the RF Board

X = satellite location A or B

N = satellite table # (98 & 99 are slots for user-

configured satellites)

F = frequency in MHz (either 00000 or a range from

10700 - 12700)

S = the satellite transponder symbol rate in

Mbit/second (01000 - 29999)

C = the FEC code (e.g., 12, 23, 34, 56, 67, 78)

ID = the satellite network ID in hexadecimal format

(0x####)

P = the LNB polarization (v = vertical,

h = horizontal, r = right, l = left)

B = the LNB down conversion frequency (l = low,

h = high, u = USA)

D = decoding type (0 = test, 1 = DSS-A,

2 = DSS-B, 3 = DVB)

This information has to be entered for each of the following

polarizations:

• vertical high • vertical low

• horizontal high • horizontal low

• right • left

2-20

A Guide to TracVision R5/R4

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 60 61

Keine Kommentare

AEG KVH 32 Betriebsanweisung Seite 31