AEG KVH 32 Betriebsanweisung PDF herunterladen (Seite 21)

2-10

A Guide to TracVision R5/R4

2.3.2 Connecting to Vehicle Power

Recommended Power Wiring

Short circuits may result in severe electrical shock or burns.

Remove the appropriate vehicle fuse and test the circuit to ensure

that no power is present before connecting the power cable.

The switchplate requires an 11-16 VDC power input. A quick-

tripping circuit breaker or fuse should be installed between the

switchplate and vehicle power. Circuit overload protection

should be rated for 5 amps. If vehicle power fluctuates widely or

is noisy, a 12 VDC 5-amp AC/DC power supply should be

installed. Test the voltage and polarity before making connections to

vehicle power.

Connecting the Power Cable to the Switchplate

1. Disconnect vehicle power by removing the

appropriate vehicle fuse.

2. Connect the switchplate to vehicle power as

pictured in Figure 2-12.

Figure 2-12

Switchplate Power Wiring

Before connecting the antenna unit

to vehicle power, remove the

appropriate vehicle fuse to prevent

a short circuit.

+12 VDC – Vehicle Power

Ground

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 60 61

Keine Kommentare

AEG KVH 32 Betriebsanweisung Seite 21