AEG KVH 32 Betriebsanweisung Seite 24

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 61
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 23
2-13
Installation
54-0157 Rev. J
2.3.5.2 Connecting Three or More Receivers
(North American Systems)
To install three or more receivers and TVs, an active multiswitch
(Channel Master #6214IFD or equivalent) must be placed
between the antenna unit and the receivers. Figure 2-15 illustrates
typical wiring arrangements for multiple receivers. If more than
four receivers are required, contact KVH for additional wiring
instructions. Mount the multiswitch unit in accordance with the
manufacturer’s instruction sheet.
Figure 2-15
Installing Three or Four Receivers Using an Active
Multiswitch
1. Connect the RF cable tagged “RF1” to the
multiswitch input labeled “LNB RHCP +13V.”
2. Connect a second RF cable to the multiswitch
input labeled “LNB LHCP +18V.”
3. Connect the multiswitch outputs to individual
receiver inputs. Use RG-6 cable terminated with
F-type connectors for all RF connections.
Multiswitch
DC In RHCP
+13V
VHF/UHF LHCP
+18V
Out 1 Out 2 Out 3 Out 4
DC Power
Receiver #1 Receiver #2 Receiver #4Receiver #3
TracVision RF Connectors
RF1
RF2
TracVision R5/R4 has the capability
to switch from one satellite to
another when you choose TV
channels that are carried by your
two selected satellites. However,
the use of an active multiswitch
may interfere with communication
from the receivers to the antenna.
In this case, you will need to use
the optional TV/SAT Switch* as
described in
Section 3.2, “Changing
Channels and Switching Between
Satellites” on page 3-2.
* To order a TV/SAT Switch (KVH Part
Number 01-0245), please call
+1 401 847-3327.
Seitenansicht 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 60 61

Kommentare zu diesen Handbüchern

Keine Kommentare