Aeg F55200VI0 Bedienungsanleitung PDF herunterladen (Seite 12)

Electronic adjustment

1. Press the on/off button to activate the

appliance.

2. Make sure that the appliance is in set-

ting mode. Refer to ‘SETTING AND

STARTING A PROGRAMME’.

3. Press and hold Delay and Start at the

same time until the indicators (A), (B)

and (C) flash.

4. Press Program.

• The indicators (B) and (C) go off.

• The indicator (A) continues to flash.

• The display shows the setting of the

water softener. Example:

= lev-

el 5.

5. Press Program again and again to

change the setting.

6. Deactivate the appliance to confirm.

FILLING THE SALT CONTAINER

1.

Turn the cap counterclockwise and

open the salt container.

2.

Put 1 litre of water in the salt contain-

er (only for the first time).

3.

Fill the salt container with dishwasher

salt.

4.

Remove the salt around the opening

of the salt container.

5.

Turn the cap clockwise to close the

salt container.

CAUTION!

Water and salt can come out from

the salt container when you fill it.

Risk of corrosion. To prevent it, af-

ter you fill the salt container, start

a programme.

FILLING THE RINSE AID DISPENSER

M

A

X

1

2

3

4

+

-

A

B

D

C

1.

Press the release button (D) to open

the lid (C).

2.

Fill the rinse aid dispenser (A), no

more than the mark 'max'.

3.

Remove the spilled rinse aid with an

absorbent cloth to prevent too much

foam.

4.

Close the lid. Make sure that the re-

lease button locks into position.

You can turn the selector of the

released quantity (B) between po-

sition 1 (lowest quantity) and posi-

tion 4 (highest quantity).

12

www.aeg.com

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare