Aeg F99009M0P Bedienungsanleitung

FAVORIT 88419ENDISHWASHER USER MANUAL

IndicatorsSalt indicator. It comes on when it is necessary to fill the salt container. 1)After you fill the container, the salt indicator can stay on

Option touchpad Multitab ÖKO PLUS Extra-HygienePress one time ACTIVATED DEACTIVATED DEACTIVATEDPress two times DEACTIVATED ACTIVATED DEACTIVATEDPress

USE OF THE APPLIANCE1. Be sure that the set level of the water softener agrees with the water hardness in yourarea. If not, adjust the water softener.

Manual adjustmentTurn the water hardness dial to the position 1 or 2(refer to the table).Electronic adjustment1. Activate the appliance.2. Make sure t

USE OF DETERGENT AND RINSE AID2030MAX1234+-1234567Use of detergentTo help the environment, do not use more than the correct quantity of detergent.Obey

You can set the rinse aid dosage between position 1 (lowest dosage) and position 4 (highestdosage).Turn the rinse aid selector 4 to increase or decrea

• Mix the spoons with other cutlery to prevent them to bond together.• When you put the items in the baskets, make sure that the water can touch all s

FunctionsProgramme Extra-Hygiene ÖKO PLUSYes, with effect Yes, with effectYes, without effect Yes, with effectYes, without effect Yes, without effectY

• The related programme indicator comes on.• The programme time flashes in the display.• The phase indicators of the set washing programme come on.5.

• Close the appliance door.– The washing programme continues from the point of interruption.Cancelling the washing programmeIf the washing programme h

FOR PERFECT RESULTSThank you for choosing this AEG product. We havecreated it to give you impeccable performance for manyyears, with innovative techno

1. Turn the filter (A) counterclockwise andremove it out from filter (B).2. Filter (A) has two parts. To disassemble thefilter, pull them apart.3. Ful

WHAT TO DO IF…The start of the appliance does not occur or it stops during operation.First try to find a solution to the problem (refer to the table).

Malfunction Possible cause Possible solution The delay start is set. • Cancel the delay start.• When the countdown iscompleted, the washing pro-gramm

Problem Possible cause Possible solution The detergent can be thecause.Use a different brand of deter-gent.The dishes are wet. The washing programme

Capacity Place settings 91) Connect the water inlet hose to a water tap with 3/4" thread.If the hot water comes from alternative sources of energ

How to remove the appliance worktop1. Remove the rear screws (1).2. Pull the worktop from the behind of theappliance (2).3. Lift the worktop and move

If you connect the water drain hose to a trap spi-got under the sink, remove the plastic membrane(A). If you do not remove the membrane, remain-ing fo

27

www.aeg.com/shop 117935980-B-062011

CONTENTS4 Safety information8 Product description9 Control panel12 Use of the appliance12 Setting the water softener13 Use of dishwasher salt14 Use of

SAFETY INFORMATIONBefore the installation and use, read this manual carefully:• For your safety and the safety of your property.• To help the environ

• Fill the appliance with salt before you start a washing programme. Remaining salt in theappliance can cause corrosion or make a hole in the bottom o

• The water inlet hose has a safety valve and a double sheath with an inner mains cable.There is pressure in the water inlet hose only when the water

Emission wave length: 450 nmMaximum emitted power: 548 μWTo replace the internal lamp, contact the service centre.Disconnect the mains plug from the m

PRODUCT DESCRIPTION123456789101 Upper basket2 Water hardness dial3 Salt container4 Detergent dispenser5 Rinse aid dispenser6 Rating plate7 Filters8 Lo

CONTROL PANEL1345 679281 On/off button2 Programme guide3 Program touchpad4 Programme indicators5 Display6 Delay touchpad7 Start touchpad8 Indicators9