AEG LAV88830-W Bedienungsanleitung PDF herunterladen (Seite 34)

Instructions for use

34

The drain pump for the

washing machine runs

constantly - even when

the appliance is

switched off.

The Aqua Control anti-flood

system has been activated.

Turn off the tap, then re-

move the plug from the

mains and inform Customer

Service.

Conditioner was not

washed in, compart-

ment æ for care

agents is filled with

water.

Filter insert in the compart-

ment for care agent not cor-

rectly attached or is blocked.

Clean the detergent drawer

and firmly attach the filter

insert.

Washing heavily

creased.

Probably too mush washing

put in.

Pay attention to the maxi-

mum filling quantity (see

Program tables). Select the

EASY IRON (STRIJKVRIJ) pro-

gram for easy-care fabrics.

Washing not well spun.

Residual water still vis-

ible in the drum.

Error code

(2 appears.

Drainage hose bent. Remove the bend.

The maximum pump height

(discharge height 1m from

the positioned surface of the

appliance ) is exceeded.

Contact your customer serv-

ice. For pumping heights

over lm he can offer you a

conversion kit as a special

accessory.

Solution pump blocked.

Switch off the unit and pull

out the mains plug. Clean

the solution pump.

If a siphon is connected: Si-

phon blocked.

Clean the siphon.

The filling door cannot

be opened with the

unit switched on.

The door is locked for safety

reasons (the DOOR/DEUR dis-

play is not illuminated).

Wait until DOOR (DEUR) is il-

luminated in green.

The program saving function

is set.

Cancel the program saving

function (see "Program Sav-

ing“).

The washing machine is in

the stand-by mode.

Press DOOR (DEUR) button

again.

Problem Possible Cause Remedy

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare