AEG LAV88830-W Bedienungsanleitung PDF herunterladen (Seite 41)

Instructions for use

Program Saving

To protect a program setting against unwanted changes (e. g. turning

the program selector, pressing auxiliary buttons etc.), you can set the

program saving function. This prevents damage to your washing.

Setting and cancelling the program saving function is possible at any

time during a program.

Setting the Program Saving Function:

0 1. Set the required washing program.

2. To start the program, press the START/PAUSE (START/PAUZE) button.

3. Simultaneously keep the PRE WASH (VOORWAS) button and the

SOAKING (INWEKEN) button pressed for 5 seconds. The program se-

quence display flashes for 5 seconds;

The program saving function is set.

You cannot make any other settings as long as the program saving

function is set. The door cannot be opened with the DOOR/LIGHT

(DEUR/LICHT) button. Even after the washing cycle has ended, you must

first cancel the program saving function before you can open the door.

If an attempt is made during the washing cycle to change the selected

setting by pressing a button, the program sequence display flashes for

5 seconds.

If an attempt is made to change the selected setting by turning the

program selector, the program sequence display flashes until the origi-

nal position of the program selector is restored. The washing cycle is

not influenced in either case.

The program selector must be in its original position before you can

cancel the program saving function.

Canceling the Program Saving Function:

0 Simultaneously keep the PRE WASH (VOORWAS) button and the SOAK-

ING (INWEKEN) button pressed for 5 seconds. The program sequence

display flashes for 5 seconds, then it lights up constantly for 5 seconds.

The program saving function is cancelled.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 55 56

Keine Kommentare

AEG LAV88830-W Bedienungsanleitung Seite 41