AEG 47035VD-MN Bedienungsanleitung PDF herunterladen (Seite 31)

80-85

mm

317-

322 mm

How to install the anti-tilt protection

1.

Set the correct height and area for

the appliance before you attach the

anti-tilt protection.

2.

Make sure that the surface behind

the appliance is smooth.

3.

Install the anti-tilt protection 317 -

322 mm down from the top surface

of the appliance and 80 - 85 mm

from the side of the appliance into

the circular hole on a bracket. Screw

it into the solid material or use appli-

cable reinforcement (wall).

4.

You can find the hole on the left side

at the back of the appliance. See the

illustration.

5.

If you changed the dimensions of

the cooker, you must align the non-

tip device correctly.

If the space between the bench

cupboards is larger than the

width of the appliance, you must

adjust the side measurement to

center the appliance.

14.5 Electrical installation

The manufacturer is not responsi-

ble if you do not follow safety

precautions from the chapter

"Safety information".

This appliance is supplied without a

main plug and a main cable.

Applicable cable type: H05 RR-F with ad-

equate cross-section.

WARNING!

Before you connect the mains ca-

ble to the terminal, measure the

voltage between phases in the

house network.

Then, refer to the connection la-

bel at the back of the appliance

to use the correct electrical in-

stallation

This order of steps prevents from

installation errors and damage to

the electrical components of the

appliance.

The power cable must not touch

the part of the appliance shown

in the illustration.

ENGLISH 31

1 2 ... 26 27 28 29 30 31 32 33 34 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare