AEG BP5014301M Bedienungsanleitung PDF herunterladen (Seite 32)

CAUTION!

Do not let the removable shelf

supports stay in the appliance

during the cleaning procedure.

There is a risk of damage.

2.

Remove the worst dirt manually.

3.

Fully close the oven door.

The cleaning procedure cannot

start if you do not close the oven

door.

4.

Set the function Pyrolysis. Refer to

"Oven functions".

5.

When flashes, press + or - to set

the necessary procedure:

– P1 - if the oven is not very dirty.

The procedure is 1 h 30 min long.

– P2 - if the oven is more dirty. The

procedure is 2 h 30 min long.

6.

Press to start the procedure. You

can use the End function to delay

the start of the cleaning.

When the oven is at the set temper-

ature, the door locks. The display

shows the symbol and the bars of

the heat indicator.

To stop Pyrolysis before it is

completed, turn the knob for the

oven functions to the off posi-

tion.

When Pyrolysis is completed, the display

shows the time of day. The oven door

stays locked. When the appliance is cool

again, an acoustic signal sounds and the

door unlocks.

During the Pyrolysis the oven

lamp is off.

Cleaning reminder

To remind you that Pyrolysis is necessa-

ry, PYR flashes in the display for 10 sec-

onds after each activation and deactiva-

tion of the appliance.

The cleaning reminder goes off the

display:

• After the end of the Pyrolysis function

• If you press + and - at the same time

while PYR flashes in the display.

10.3 Oven lamp

WARNING!

Be careful when you change the

oven lamp. There is a risk of elec-

trical shock.

Before you change the oven lamp:

• Deactivate the oven.

• Remove the fuses in the fuse box or

deactivate the circuit breaker.

Put a cloth on the bottom of the

oven to prevent damage to the

oven light and glass cover.

Always hold the halogen lamp

with a cloth to prevent grease

residue from burning on the

lamp.

1.

Turn the glass cover counterclock-

wise to remove it.

2.

Clean the glass cover.

3.

Replace the oven light bulb with an

applicable 300 °C heat-resistant

oven light bulb.

Use the same oven lamp type.

4.

Install the glass cover.

10.4 Cleaning the water tank

WARNING!

Do not put water into the water

tank during the cleaning proce-

dure.

During the cleaning procedure,

some water can drip from the

steam inlet onto the cavity of the

oven. Put a dripping pan on the

shelf level directly below the

steam inlet to prevent water from

falling onto the bottom of the

oven cavity.

After some time, you can have lime de-

posits in your oven. To prevent this,

clean the parts of the oven that generate

the steam. Empty the tank after each

steam cooking.

1.

Fill in the water tank with 850 ml of

water and 50 ml of citric acid (five

teaspoons). Deactivate the oven and

wait for approximately 60 minutes.

2.

Activate the oven and set the True

Fan + Steam function. Set the tem-

32

www.aeg.com

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 83 84

Kommentare zu diesen Handbüchern

Keine Kommentare