AEG FSK93800P Bedienungsanleitung PDF herunterladen (Seite 13)

setting of XtraDry is permanent and it is

automatically used in next cycles. This

configuration can be changed at any

time.

Activating XtraDry option deactivates

TimeSaver.

7.4 TimeSaver

This option increases the pressure and

the temperature of the water.

The washing and drying phases are

shorter. The total programme duration

decreases by approximately 50%.

The washing results are the same as with

the normal programme duration but the

drying results can be less satisfactory.

The TimeSaver option is not applicable

to all programmes.

1. Scroll through the programme list

and select a programme.

2. Press the OK key to confirm.

If the TimeSaver option is applicable to

the selected programme, the display

shows the 2 conditions Fast and Normal

and the programme duration for each

condition:

• Fast: TimeSaver activated. Press

the OK key to confirm.

• Normal: TimeSaver deactivated.

Press the OK key to confirm.

8. BEFORE FIRST USE

The first time you activate the appliance

it is necessary to set the language.

Default language is English.

1. Set the language.

• Press OK to confirm English.

• Scroll the list of available

languages for a new language

and press OK to confirm.

2. Make sure that the current level of

the water softener agrees with the

hardness of the water supply. If

not, adjust the level of the water

softener.

3. Fill the salt container.

4. Fill the rinse aid dispenser.

5. Open the water tap.

6. Start a programme to remove any

processing residuals that can still be

inside the appliance. Do not use

detergent and do not load the

baskets.

When you start a programme, the

appliance can take up to 5 minutes to

recharge the resin in the water softener.

It seems that the appliance is not

working. The washing phase starts only

after this procedure is completed. The

procedure will be repeated periodically.

8.1 The water softener

The water softener removes minerals

from the water supply, which would have

a detrimental effect on the washing

results and on the appliance.

The higher the content of these minerals,

the harder your water is. Water hardness

is measured in equivalent scales.

The water softener should be adjusted

according to the hardness of the water in

your area. Your local water authority can

advise you on the hardness of the water

in your area. It is important to set the

right level of the water softener to assure

good washing results.

Water hardness

German de-

grees (°dH)

French degrees

(°fH)

mmol/l Clarke de-

grees

Water softener lev-

el

47 - 50 84 - 90 8.4 - 9.0 58 - 63 10

43 - 46 76 - 83 7.6 - 8.3 53 - 57 9

ENGLISH 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare