AEG CGB60100CX Bedienungsanleitung PDF herunterladen (Seite 12)

Changing from liquid gas to

natural gas

1. Unscrew approximately one turn the

bypass screw position A.

2. Put the knob for the hob back.

3. Connect the appliance to the

electricity.

WARNING!

Put the mains plug into

the mains socket only if

all parts are back into

their initial position.

There is a risk of injury.

4. Light the burner.

Refer to "Hob - Daily use" chapter.

5. Turn the knob for the hob to the

minimum position.

6. Remove the knob for the hob again.

7. Screw on slowly the bypass screw till

the flame becomes minimum and

stable.

8. Put the knob for the hob back on.

3.13 Oven injector

replacement

1. Remove the bottom plate of the

oven cavity A to get access to the

oven burner B.

AB

2. Release the screw C, which keep the

burner in position.

C

3. Carefully move the burner off the

injector support D.

D

E

F

4. Slowly move it to the left side. Make

sure that the burner bush stays on

the burner mouthpiece. Do not apply

force to the wire of the spark plug

connector F and to the

thermocouple conductor E.

5. Release the burner injector D with a 7

mm socket spanner and replace it

with a different one.

Assemble the burner in a revers

sequence.

Replace the gas type sticker near the gas

supply ramp with the one related to the

new gas type.

3.14 Adjusting the minimum

gas level on the oven burner

1. Disconnect the appliance from the

electricity.

2. Remove the knob for the oven

functions. If there is no access to the

www.aeg.com

12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare