AEG FM4300GAN Bedienungsanleitung PDF herunterladen (Seite 8)

Ceramic glass is insensitive to tem-

perature shock and very robust:

however it is not unbreakable.

Especially sharp and hard

objects that fall on the cooking sur-

face can damage it.

Ceramic hob

Burners

The burners are made up of a burner

body, a burner ring and a burner cap.

Each burner has electrical ignition

which means you do not need

matches to light it. Each burner has a

safety device. If the flame goes out,

the safety device will automatically

shut off the gas supply.

Burner ring Burner cap

Burner body Safety device

To optimise joints between the installed hobs, the gap between the ceramic hob

may be grouted with silicone:

1. Remove the aluminium panels from the hobs.

2. Apply a stripe of silicone to the gap between the two ceramic hob. Use only

the silicone supplied, as it is designed to tolerate the appliance’s high temper-

ature. (Fig. 1)

3. Splash a little soapy water (washing-up liquid) on the silicone stripe

4. Press the rubber block hard against the ceramic hob and pull it slowly from

back to front (Fig. 2)

5. Leave the silicone to harden until the next day.

6. Remove surplus silicone coating from the ceramic hob with the razorblade

supplied. Be careful not to damage the silicone in the gap. Run tools only

along the joint, never across it.

7. Polish the ceramic hob with the supplied cleaning product for ceramic hobs.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

AEG FM4300GAN Bedienungsanleitung Seite 8