USER MANUALEN User ManualWashing MachineLFM9C9413N
Make sure that the drainhose end is not immersed inthe water. There may be areturn of dirty water into theappliance.3. To a stand pipe with vent-hole
then fabric softener in the waterbefore they are distributed in thelaundry. So every fibre is reached andcared for.• The ProSense technology detectsth
Max▼Max▼Max▼SaltSaltCompartment for washing phase:powder detergent, stain remover.When using liquiddetergent, make surethat the specialcontainer for l
3. Touch the Stains/Prewash and thePlus Steam buttons simultaneously(by touching the two buttons at thesame instant, as shown in the nextdrawing) for
Levels Water hardness range °f(French de-grees)°d(German de-grees)°e(English de-grees)mmol/l ppmC07 ≥46 ≥26 ≥33 ≥4.6 ≥4601) Factory setting, able to s
WARNING!Do not put anything but saltin the compartment Salt. Ifany other detergent/additiveis poured inadvertently inthis compartment, pleaserefer to
7. CONTROL PANEL7.1 Control panel description23612 11 10 814579131Programme dial2Display3Energy saving touch button (Eco)4Time saving touch button (Ti
7.2 DisplayMIXMaximum load indicator. The icon flashes during laundry load esti-mation (refer to "PROSENSE load detection" paragraph).Maxi
Anti-crease phase indicator.Child safety lock indicator.Time saving indicator.Temperature indicator. The indicator appears when a cold wash isset.Sp
When the display shows the indicators and , the appliance does notheat the water.8.4 Spin When you set a programme, theappliance automatically select
CONTENTS1. SAFETY INFORMATION...32. SAFETY INSTRUCTIONS...
If the Extra Rinse is set as adefault option and youselect a compatible washingprogramme, the displayshows . In this case, bypressing the Extra Rinse
8.12 Start/Pause Touch the Start/Pause button to start,pause the appliance or interrupt arunning programme.9. PROGRAMMES9.1 Programme ChartAll washing
Programme Programme descriptionSteamSteam programme for cotton and synthetic items. Steamcan be used for dried2), washed or worn once laundry. Thispro
Programme Programme descriptionOutdoorDo not use fabric softener and make sure thatthere is no softener residue in the detergentdispenser.Outdoor clot
Programme Default temperatureTemperature rangeMaximum spin speedSpin speed rangeMaximum loadOKOPower30 °C60 °C - 30 °C1400 rpm1400 rpm - 400 rpm5 kgAn
Cottons Synthetics ColourPro Delicates Wool/Silk Steam OKOPowerAnti-Allergy 20 min. - 3 kg Outdoor Plus Steam1) Soft Plus
the Delay Start buttons simultaneouslyfor about 6 seconds.If you deactivate theacoustic signals, theycontinue operate when theappliance has a malfunct
Max▼Max▼Max▼Salt2. Put the powder detergent in thecompartment . If using liquiddetergent, refer to 'Filling the liquiddetergent'.Max▼Max▼Ma
default temperature, the maximum spinspeed, the washing phase indicators(when available) and an indicativeprogramme duration.2. To change the temperat
In this case, for 30 seconds, it is possibleto pause the appliance and remove theexceeding garments.Once removed the exceeding garments,touch the Star
1. SAFETY INFORMATIONBefore the installation and use of the appliance,carefully read the supplied instructions. Themanufacturer is not responsible f
While a programme or the delay startoperates, the appliance door is locked.If the temperature and levelof the water in the drum aretoo high and/or the
• After 5 minutes from the end of thewashing programmePress the On/Off button to activatethe appliance again.The display shows the end of the lastset
12.4 Ecological hints• Set a programme without theprewash phase to wash laundry withnormal soil.• Always start a washing programmewith the maximum loa
2. Run a short cotton programme athigh temperature with empty drumand with a small quantity of powderdetergent, in order to rinse out anyresidues left
6. Insert the detergent drawer into theguide rails and close it. Run therinsing programme without anyclothes in the drum.Max▼Max▼Max▼Salt13.7 Cleaning
5. When the bowl is full of water, turnthe filter back and empty thecontainer.6. Repeat the steps 4 and 5 until thewater stops to flow out.7. Turn the
13.8 Cleaning the inlet hoseand the valve filterIt is recommended to clean both thefilters of the inlet hose and valveoccasionally to remove any depos
14. TROUBLESHOOTINGWARNING!Refer to Safety chapters.14.1 IntroductionThe appliance does not start or it stopsduring operation.First try to find a solu
Problem Possible solutionThe appliance does notfill with water properly.• Make sure that the water tap is open.• Make sure that the pressure of the wa
Problem Possible solutionThe appliance makes anunusual noise and vi-brates.• Make sure the levelling of the appliance is correct. Refer to"Instal
– by clients in hotels, motels, bed & breakfast andother residential type environments;– areas for communal use in blocks of flats or inlaunderett
CAUTION!Risk of injury! Make surethat the drum is notrotating. If necessary, waituntil the drum stopsrotating.Make sure that the waterlevel inside the
During the washing programme, the Prosense function can vary thewash duration and the consumption values. For more details see 'TheProsense funct
Level of protection against ingress of solid particlesand moisture ensured by the protective cover, ex-cept where the low voltage equipment has no pro
WARNING!Do not put the tumble dryerunder the washing machine.17.4 Pedestal with the drawerTo raise your appliance and makeloading and unloading laundr
www.aeg.com/shop157019190-A-192018
• The floor area on which the applianceis to be installed must be flat, stable,heat resistant and clean.• Make sure that there is air circulationbetwe
2.6 DisposalWARNING!Risk of injury or suffocation.• Disconnect the appliance from themains electrical and water supplies.• Cut off the mains electrica
Make sure not to damagethe hoses.7. Remove the polystyrene protectionfrom the bottom.128. Fully clean and dry the bottom of theappliance.CAUTION!Do no
16. Pull out the plastic spacers.17. Put the plastic caps, that you find inthe user manual bag, in the holes.We recommend that youkeep the packaging a
20O20O45O45OMake sure that the inlet hoseis not in vertical position.3. If necessary, loose the ring nut to setit in the correct position.4. Connect t
Kommentare zu diesen Handbüchern