AEG BP5014321M Bedienungsanleitung PDF herunterladen (Seite 11)

WARNING!

Wait a minimum of 60

minutes after each use of the

steam function in order to

prevent hot water from

exiting the water outlet

valve.

Empty the water tank after the steam

cooking is completed.

CAUTION!

The appliance is hot. There

is a risk of burns. Be careful

when you empty the water

drawer.

5.9 Water tank indicator

When the steam cooking operates, the

display shows water tank indicator. Water

tank indicator shows the level of the

water in the tank.

• - Water tank is full. An acoustic

signal sounds when the tank is full.

Press any button to stop the acoustic

signal.

• - Water tank is half full.

•

- Water tank is empty. An acoustic

signal sounds when the tank must be

refilled.

If you put too much water

into the tank, the safety

outlet moves the excess

water to the bottom of the

oven.

Remove the water with a

sponge or a cloth.

5.10 Emptying the water tank

CAUTION!

Make sure that the

appliance is cool before you

start to empty the water

tank.

1. Prepare the draining pipe (C),

included in the same package with

the user manual. Put the connector

(B) onto one of the ends of the

draining pipe.

2. Put the second end of the draining

pipe (C) into a container. Put it at a

lower position than the outlet valve

(A).

B

C

A

3. Open the oven door and put the

connector (B) into the outlet valve

(A).

4. Push the connector again and again

when you empty the water tank.

The water tank can have

some water when the

display shows

symbol. Wait until the

water flow from the

water outlet valve stops.

5. Remove the connector from the valve

when the water stops flowing.

Do not use the drained

water to fill the water tank

again.

ENGLISH 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare