AEG L9FEA966C Bedienungsanleitung PDF herunterladen (Seite 36)

• The remaining time to

programme end.

• The progress bar.

• The ProSense phase first and then

the running programme phase.

• The indicator

. When it is on, it

is still possible to stop the cycle

and add clothes.

• The door locked indicator ,

when the indicator goes off.

• The estimated cycle end time.

• The shortcut .

Cottons 40

3h01min

Washing

Finished at 15:42

The drain pump can operate

shortly before the appliance

fills water.

2. If necessary, tap on to enter the

option list and activate the Child

Lock option. Refer to "Child Lock"

section in the "Options" chapter.

The shortcut

shows up. Keep

pressed for about three seconds to

deactivate the Child Lock.

Starting a programme with

delay start

1. Touch the Start/Pause button to

start the programme.

The related led stops flashing and stays

on.

The door is locked.

The appliance starts the countdown and

the door is locked.

Cottons 40

1h29min

Finished at 15:36

Starts in

Reset

2. Tap on Reset to cancel the delay

start and then touch the Start/Pause

button or wait until the countdown is

completed.

The programme will start normally.

The ProSense detection

starts at the end of the

countdown.

During the cycle, the display

will inform you about each

running phase (e.g. washing,

rinsing and so on).

13.9 The ProSense load

detection

After touching the Start/Pause button:

1. The ProSense starts the laundry load

detection to calculate the real

programme duration. The display

shows the message Adjusting

programme to current load.

The appliance adjusts automatically

the programme duration to the load

to achieve perfect washing results in

the minimum possible time. The

programme duration could increase

or decrease.

2. After about 20 minutes the display

shows the new programme duration,

the expected programme time and

advise you about the running phase.

The ProSense detection is

carried out with complete

washing programmes only.

13.10 Interrupting a

programme and changing the

options

When the programme is running, you

can change only some options:

1. Touch the Start/Pause button .

The related led start flashing.

2. Tap on to change the options.

In the option list only the available

options will be active.

3. Touch the Start/Pause button again.

The washing programme continues and

the programme duration can change.

www.aeg.com

36

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare