AEG L99695HWD Bedienungsanleitung Seite 1

EN User ManualWasher DryerL 99695 HWD

DDigit areaTime of the dayWhen you activate the appliance the display shows the time of the day for someseconds. To adjust the clock, refer to "C

FTime saveThe indicator comes on when you set one of the programme dura-tion.Shortened timeExtra QuickG Indicator for air filtersHExtra rinsingThe val

5. PROGRAMMES5.1 Programme ChartProgrammeTemperaturerangeMaximum loadMaximum spinspeedProgramme description(Type of load and soil level)Washing/Drying

ProgrammeTemperaturerangeMaximum loadMaximum spinspeedProgramme description(Type of load and soil level)Fijne Was - Déli-cats40°C - Cold4 kg1200 rpmDe

ProgrammeTemperaturerangeMaximum loadMaximum spinspeedProgramme description(Type of load and soil level)Opfrissen - Rafraî-chir40°Cup to 1.5 kg Steam

ProgrammeT./minPre-washStains SoakExtraSpoe-len -Rin-çage+ 1)TijdBe-spa-ren -GaindeTemps2)Star-tuit-stel -Dé-partDif-féréWol/Zijde - Laine/Soie

5.3 Programmes for timed dryingDryness Level Type of fabric Load(kg)Spinspeed(rpm)Suggestedduration(mins)Extra DryFor towelling materialsCottons and L

At programme start the display shows the duration programme for themaximum load capacity. During the washing phase the programme du-ration is automati

• To activate/deactivate this functiontouch Tijd Besparen - Gain de Tempsand Startuitstel - Départ Différé at thesame time until the display show thei

8.10 Extra Spoelen - Rinçage+Touch this button to add rinsing phasesto a programme.Use this function for persons allergic todetergents and in areas wh

CONTENTS1. SAFETY INFORMATION...32. SAFETY INSTRUCTIONS.

9.3 Language settingThe first time you activate the appliance,the display shows the default languageand tells you to confirm it or change it:1. Turn t

10.4 Filling the detergent andadditivesCompartment for prewash phase,soak programme or stain remover.Compartment for washing phase.Compartment for liq

10.6 Starting a programmewithout the delay startTouch button Start/Pauze - Départ/Pauseto start the programme.The relevant indicator stops to flash an

To open the appliance door:1. Touch button Start/Pauze - Départ/Pause.The door lock symbol in the display goesoff.2. Open the appliance door.3. Close

11.1 Preparation to dryingWARNING!Open the water tap. Putthe drain hose in the sinkor connect to the drainpipe.1. Press buttonAan/Uit - Marche/Arrêtfo

• Press the button Aan/Uit - Marche/Arrêt for some seconds to deactivatethe appliance.After some minutes fromthe end of theprogramme, the energysaving

• To do not wash dark fabrics after youwashed and dried light colouredfabrics (new sponge, hand towel,wool, sweatshirt ) and the contrary.• To dry thi

13.4 Ecological hints• Set a programme without theprewash phase to wash laundry withnormal soil.• Always start a washing programmewith the maximum loa

14. CARE AND CLEANINGWARNING!Refer to Safety chapters.14.1 External cleaningClean the appliance only with soap andwarm water. Fully dry all the surfac

3. 4.14.6 Cleaning the air filtersThe air filters collect the fluff. The fluff normally occurs when the clothesare dried in a washer-dryer.• At the en

1. SAFETY INFORMATIONBefore the installation and use of the appliance,carefully read the supplied instructions. Themanufacturer is not responsible i

5. PULL6. 7. 8. 9.10. +To have best drying performances clean regularly the air filters with warmwater and afterwards dry them with a towel. Clogged

1.122.2113. 4.125.126.7. 8.12ENGLISH 31

9.12 14.8 Cleaning the inlet hose filter and the valve filterIt could be necessary to clean the filters when:• The appliance does not fill with water.

• Clean the filter in the valve with a stiffbrush or a towel.45°20°• Install again the inlet hose. Make sure thatthe couplings are tight to preventlea

15.1 IntroductionThe start of the appliance does not occur or it stops during operation.First try to find a solution to the problem (refer to the tabl

Message Possible solutionAt the end of the washingcycle the display tells thattoo much detergent wasused.This is not a failure but a suggestion for ne

Problem Possible solution Make sure that the drain hose have no damages. Make sure you use the correct detergent and the correctquantity of it.You c

Problem Possible solution Make sure you have set the correct cycle. If necessary, seta short drying time again.The drying cycle is too long. Make sur

5. Take out the laundry and then closethe appliance door.6. Close the filter flap.16. INSTALLATIONWARNING!Refer to Safety chapters.16.1 UnpackingWARNI

• Remove the cardboard top.• Remove the polystyrene packagingmaterials.• Remove the internal film.• Open the door.• Remove the polystyrene piece fromt

side, where the appliance door can not be fullyopened.• Connect the mains plug to the mains socket only atthe end of the installation. Make sure that

• Pull up the appliance in verticalposition.• Remove the power supply cable andthe drain hose from the hose holders.It is possible to see waterflowing

16.3 Installation under a counter600 mm600 mm≥ 870 mmThe appliance can be installed asfreestanding or below the kitchen counterwith correct space (see

16.5 The inlet hose20O20O45O45O• Connect the hose to the back appliance.Turn the inlet hose only left or right.• Loose the ring nut to set it in the c

• Making an U form with the drain hose.On the edge of a sink• Make sure that the plastic guide cannotmove when the appliance drains. Attachthe guide t

To a sink spigot• Refer to the illustration. Put the drain hosein the spigot and tighten it with a clip.• Make sure that the drain hose makes aloop to

Wool 1Spin Speed Maximum 1600 rpm1) Connect the water inlet hose to a water tap with a 3/4'' thread.18. ENVIRONMENTAL CONCERNSRecycle the

www.aeg.com46

ENGLISH 47

www.aeg.com/shop132906061-A-302014

• Items such as foam rubber (latex foam), shower caps,waterproof textiles, rubber backed articles and clothesor pillows fitted with foam rubber pads s

2.2 Electrical ConnectionWARNING!Risk of fire and electricalshock.• The appliance must be earthed.• Always use a correctly installedshockproof socket.

3. PRODUCT DESCRIPTION3.1 Appliance overview1 2 3 41167895121314101Worktop2Detergent dispenser3Air filter(s)4Control panel5Door handle6Rating plate7Dr

3.3 Accessories1 2341 SpannerTo remove the transit bolts.2 Plastic capsTo close the holes on the rear side of thecabinet after the removal of the tran

4.2 DisplayA B C DEFGHIJKThe display shows:AThe text bar:• Guides you in the use of the appliance.• Shows the programme status and phase.• Shows alarm