Aeg L 96485 FL Bedienungsanleitung

L 98685 FLL 96485 FLENWASHING MACHINE USER MANUAL

D• The time of the dayWhen you activate the appliance the display shows the time of the day for someseconds. To adjust the clock, refer to "Clock

HStainsPrewashSoakThe indicator bar fills accordingly to the set functions.IThe default spin speed of the programme._ _ _No spin 1)Rinse hold1) Only a

You can select:SHORTENED DURATIONTo wash items with daily soil.EXTRA QUICKTo wash quickly items with almost no soil.Some programmes accept only one of

• You touch the buttons.• The programme is completed.• The appliance has a malfunction.To deactivate/activate the acoustic signals, touch button 10 a

Programme Temperature Type of loadWeight of loadProgramme de-scriptionFunctionsPflegeleicht 60° - ColdRinsesShort spinSynthetic or mixedfabric items w

Programme Temperature Type of loadWeight of loadProgramme de-scriptionFunctionsSpülen 0° All fabricsMaximum load 8 kgRinse with addi-tivesSpin phaseSP

Dampf Auffrischen2)This cycle removes odour from thelaundry.Steam does not remove animal odours.Cotton and synthetic items.Do not set the Steam progra

2. Put a small quantity of detergent in the main wash compartment of the detergent dis-penser. Set and start a programme for cotton at the highest tem

ACTIVATING THE APPLIANCE AND SETTING A PROGRAMMEFor a correct operation of the weight sensor, activate the appliance and set the programme BEFOREyou p

Make sure not to have the laundry out ofthe drum between the seal and the door.There is the risk of water leakage or damagelaundry.USING THE DETERGENT

FOR PERFECT RESULTSThank you for choosing this AEG product. We havecreated it to give you impeccable performance for manyyears, with innovative techno

Check the position of the flap1. Pull out the detergent dispenser until itstops.2. Press the lever down to remove the dis-penser.3. To use powder dete

You cannot set the delay start with the Steam programme.STARTING A PROGRAMME1. Touch button 6 to start the programme. The indicator of button 6 st

If you deactivate the appliance, it is necessary to set the programme again.AT THE END OF PROGRAMME1. The appliance stops automatically.2. The acousti

• Turn inside out multilayered fabrics, wool and items with painted illustrations.• Remove hard stains.• Wash with a special detergent heavy soil stai

Water hardness tableLevel TypeWater hardness°dH °T.H. mmol/l Clarke1 soft 0-7 0-15 0-1.5 0-92 medium 8-14 16-25 1.6-2.5 10-163 hard 15-21 26-37 2.6-3.

Door sealRegularly examine the seal and remove allobjects from the inner part.DrumRegularly examine the drum to prevent limescale and rust particles.O

5. Clean the dispenser recess with a brush.6. Put back the dispenser in the recess.Drain pumpRegularly examine the drain pump and make sure that it is

125. When the container is full of water, putthe drainage duct back again and emp-ty the container. Do steps 4 and 5 againand again until no more wate

To clean the water inlet filters:1. Close the water tap.2. Remove the water inlet hose from thewater tap.3. Clean the filter in the inlet hose with as

WARNING!Make sure that the temperature is more than 0 °C before you use the appliance again.The manufacturer is not responsible for damages caused by

CONTENTS4 Safety information6 Environment concerns7 Product description8 Accessories8 Control panel13 Washing programmes16 BEFORE FIRST USE17 Using th

PROBLEM WITHOUT ALARM MESSAGEProblem Possible cause Possible solutionThe appliance doesnot drain the water.A washing programme with-out the drain phas

Problem Possible cause Possible solution You did not remove the stub-born stains before you washthe laundry.Use special products to remove thestubbor

Product number(PNC)...Serial number(S.N.)...TECHNICAL DATADimensions Width / Height / Depth 600 / 850 / 600 mm Total de

2. Remove the cardboard top.3. Remove the polystyrene packaging ma-terials.4. Remove the internal film.5. Open the door. Remove the polystyrenepiece f

127. Remove the polystyrene protectionfrom the bottom.8. Pull up the appliance in vertical posi-tion.9. Remove the power supply cable and thedrain hos

12. Replace the plastic spacers with theplastic caps. You can find these caps inthe user manual bag.WARNING!Remove all the packaging and the transit b

CAUTION!Do not put cardboard, wood or equivalent materials below the appliance feet to adjust thelevel.The inlet hose35O35O35O45O45O45O• Connect the h

Water drainageThere are different procedures to connect the drain hose:With the plastic hose guide. • On the edge of a sink.• Make sure that the plast

• Directly to a built-in drain pipe in theroom wall and tighten it with a clip.You can extend the drain hose to maximum 400 mm. Contact the service ce

39

SAFETY INFORMATIONBefore the installation and use, read this manual carefully:• For your safety and the safety of your property• To help the environm

www.aeg-electrolux.com/shop 132940550-A-482010

• Do not touch the glass of the door while a programme operates. The glass can be hot(only for front-loading appliances).Care and cleaning• Deactivate

• Do not use multiple plugs and extension cables. There is a risk of fire.• Do not replace or change the mains cable. Contact the service centre.• Mak

PRODUCT DESCRIPTION1 2 3910657841112131 Worktop2 Detergent dispenser3 Control panel4 Door handle5 Internal lamp6 Rating plate7 Drain pump8 Feet for th

ACCESSORIES1 2341 SpannerTo remove the transit bolts.2 Plastic capsTo close the holes on the rear side ofthe cabinet after the removal of thetransit b

TOUCH SCREENDo not wear gloves when you touch the buttons.Make sure the touch screen and buttons are always clean and dry.AUTO OFF button 1Press this