AEG BEE641221M Bedienungsanleitung PDF herunterladen (Seite 30)

Make sure that you put the glass panels

(A and B) back in the correct sequence.

The first panel (A) has a decorative

frame. The screen-printing zone must

face the inner side of the door. Make

sure that after the installation the surface

of the glass panel frame (A) on the

screen-printing zones is not rough when

you touch it.

A B

Make sure that you install the middle

panel of glass in the seats correctly.

12.6 Replacing the lamp

Put a cloth on the bottom of the interior

of the appliance. It prevents damage to

the lamp glass cover and the cavity.

WARNING!

Danger of electrocution!

Disconnect the fuse before

you replace the lamp.

The lamp and the lamp glass

cover can be hot.

CAUTION!

Always hold the halogen

lamp with a cloth to prevent

grease residue from burning

on the lamp.

Deactivate the appliance.

2. Remove the fuses from the fuse box

or deactivate the circuit breaker.

The back lamp

1. Turn the lamp glass cover

counterclockwise to remove it.

2. Clean the glass cover.

3. Replace the lamp with a suitable 300

°C heat-resistant lamp.

4. Install the glass cover.

13.

TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

13.1 What to do if...

Problem Possible cause Remedy

You cannot activate or oper-

ate the oven.

The oven is not connected

to an electrical supply or it is

connected incorrectly.

Check if the oven is correctly

connected to the electrical

supply (refer to the connec-

tion diagram if available).

The oven does not heat up. The oven is deactivated. Activate the oven.

The oven does not heat up. The clock is not set. Set the clock.

www.aeg.com30

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

AEG BEE641221M Bedienungsanleitung Seite 30

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein AEG BEE641221M