AEG AGS1901 Bedienungsanleitung PDF herunterladen (Seite 12)

2.

Engage the spacer below the screw.

3.

Turn the spacer to the right position.

4.

Tighten again the screws.

2

4

3

1

8.5 Levelling

When placing the appliance ensure that

it stands level. This can be achieved by

two adjustable feet at the bottom in

front.

8.6 Door reversibility

To carry out the following opera-

tions, we suggest that this be

made with another person that

will keep a firm hold on the

doors of the appliance during

the operations.

To change the opening direction of the

door, do these steps:

• Remove the plug from the power

socket.

• Tilt back the appliance carefully so

that the compressor cannot touch the

floor.

• Remove the plinth.

• Unscrew and remove the lower hinges.

• Remove the door.

• Unscrew the upper pin and screw it on

the opposite side.

• Refit the door.

• Make sure the edge of the door is par-

allel with the edge of the top.

2

1

• Unscrew the pin (A) and screw it on

the opposite side.

• Remove the cap (B) and position it on

the opposite side.

• Screw the lower hinges.

• Refit the plinth.

• Stand the appliance upright.

A

B

• Fit the handle on the opposite side

and put the plastic caps (contained in

the instructions bag) in the free holes.

• Do a final check to make sure that:

– All screws are tightened.

– The door opens and closes correct-

ly.

If the ambient temperature is cold (i.e. in

Winter), the gasket may not fit perfectly

12

www.aeg.com

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare