Aeg HG995440NB Bedienungsanleitung

HG956440SMIE GB ENGAS HOB USER MANUAL

The manufacturer declines any liability should these safety measures not be observed.This hob is designed to be connected to a 230 V 50 Hz AC electric

Replacement of the connection cableTo replace the connection cable use only H05V2V2-F T90 or equivalent type. Make sure thatthe cable section is appli

Kitchen unit with ovenThe hob recess dimensions must obey the indication and the kitchen unit must be equippedwith vents to let a continuous supply of

OPERATIONIgnition of the burnerWARNING!Be very careful when you use open fire in kitchen environment. Manufacturer decline anyresponsibility in case m

1 Burner cap2 Burner crown3 Ignition candle4 ThermocoupleWARNING!Do not keep the control knob pushed for more than 15 seconds.If the burner does not l

WARNING!Use pots and pans with diameter applicable to the dimension of burner.Do not use cooking vessels on the hotplate that overlap its edges.Burner

• When you wash the pan supports by hand, take care when you dry them as the enamel-ling process occasionally leaves rough edges. If necessary, remove

WHAT TO DO IF…Problem Possible cause RemedyThere is no spark when lightingthe gas• There is no electrical supply • Make sure that the unit isconnected

MOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NODATAMODELMODELMOD.PROD.NO.SER.NO.03 ITMADE IN ITALYTYPE230V-50HzIP2000491 2 31 Stick it on Guarantee Card an

TOTAL POWER: G20 (2H) 20 mbar = 13 kWG30 (3+) 28-30 mbar = 931 g/hG31 (3+) 37 mbar = 914 g/hElectric supply: 230 V ~ 50 Hzsupply, 3 core flexible cabl

FOR PERFECT RESULTSThank you for choosing this AEG product. We havecreated it to give you impeccable performance for manyyears, with innovative techno

disposed of correctly, you will help prevent potential negative consequences for theenvironment and human health, which could otherwise be caused by i

21

22

23

www.aeg.com/shop 397202101-A-062011

CONTENTS4 Safety information6 Installation12 Product description13 Operation14 Helpful hints and tips15 Care and cleaning17 What to do if…18 Technical

SAFETY INFORMATIONWARNING!These instructions are only valid in the countries whose symbols appear on this booklet'scover.For your safety and cor

• Pots must not enter the control zone.• Do not use not stable cookware to prevent from tilt and accident.• Do not put flammable products or items tha

• This appliance is not connected to a combustion products evacuation device. It must beinstalled and connected in accordance with current installatio

Important safety requirementsThis hob must be installed in accordance with the Gas Safety (Installation and Use) Regula-tions (Current Edition) and th

1231 End of shaft with nut2 Washer3 ElbowConnection to the gas supply should be with either rigid or semi-rigid pipe, i.e. steel or cop-per.The connec

Adjustment of minimum levelTo adjust the minimum level of the burners:1. Light the burner.2. Turn the knob on the minimum position.3. Remove the knob.