AEG KVH 32 Installationsanleitung PDF herunterladen (Seite 10)

11

Follow the steps below to seal the cable access

hole.

a. Seal the cable access hole on the deck with a

liberal amount of silicone sealant, RTV, or

equivalent to protect against leakage.

b. Install the clamshell ventilator, supplied in

the kitpack, over the cable access hole using

three of the supplied #6 screws (see

Figure 16).

c. Circular only:

Route the RF cable(s) to the grounding block

location you chose in “Plan the Installation”

on page 4.

Linear only:

Route the RF cable to the receiver location.

d. Route the power/data cable through the

switchplate cutout you made in “Cut Out the

Switchplate Hole” on page 9.

Figure 16: Installing the Clamshell Ventilator

Clamshell

Ventilator

Power/Data

& RF Cables

#6 Screw (x3)

Seal the Cable Access Hole

9

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare