AEG HVB95450IB Bedienungsanleitung PDF herunterladen (Seite 24)

Problem Possible cause Remedy

There is water or fat stains

on the control panel.

Clean the control panel.

An acoustic signal sounds

and the hob deactivates.

An acoustic signal sounds

when the hob is deactivated.

You put something on one

or more sensor fields.

Remove the object from the

sensor fields.

The hob deactivates. You put something on the

sensor field .

Remove the object from the

sensor field.

Hob²Hood function does not

work.

You covered the control

panel.

Remove the object from the

control panel.

The sensor fields become

hot.

The cookware is too large or

you put it too near to the

controls.

Put large cookware on the

rear burners if possible.

There is no sound when you

touch the panel sensor

fields.

The sounds are deactivated. Activate the sounds. Refer to

"Daily use".

comes on.

Automatic Switch Off oper-

ates.

Deactivate the hob and acti-

vate it again.

comes on.

The Child Safety Device

function operates.

Refer to "Daily use".

comes on.

There is a fault. To reset the fault, deactivate

and activate the hob, after

light animation, when re-

appears, touch and then

within 3 seconds.

When you see the fault is

reset.

Make sure that the crown

and the flame cap are cor-

rectly positioned, and clean

the metal part of the flame

safety device.

You can hear a constant

beep noise.

The electrical connection is

incorrect.

Disconnect the hob from the

electrical supply. Ask a quali-

fied electrician to check the

installation.

comes on.

The hob is too hot. Wait a few minutes for cool

down the hob. If possible,

put the large cookware on

the rear burners.

www.aeg.com24

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare