AEG HD634170NB Bedienungsanleitung PDF herunterladen (Seite 21)

3. The outlet or omnipolar switch used

for connection is easily accessible

with the appliance installed.

The appliance is supplied with a 3 core

flexible power cable.

The wires in the cord are coloured as

follows:

Green and yellow - Earth

Blue - Neutral

Brown - Live

WARNING!

A cut off plug inserted into a

13 amp socket is a serious

shock hazard. Ensure that

the cut off plug is disposed

of safely.

8.8 Replacement of the

connection cable

The replacement of electric

cable must be carried out

exclusively by the service

force centre or by personnel

with similar competencies, in

accordance with the current

regulations.

Make sure that the cable

section is applicable to the

voltage load and the

working temperature. The

yellow/green earth wire (B)

must be approximately 2 cm

longer than the live and

neutral wire (A).

A B

1. Connect the green and yellow (earth)

wire to the terminal which is marked

with the letter 'E', or the earth

symbol

, or coloured green and

yellow.

2. Connect the blue (neutral) wire to the

terminal which is marked with the

letter 'N' or coloured blue.

3. Connect the brown (live) wire to the

terminal which is marked with the

letter 'L'. It must always be

connected to the network phase.

There must be no cut or stray strands

of wire present. The cord clamp must

be correctly attached to the outer

sheath.

8.9 Attaching the seal

1. Clean the worktop around the cut

out area.

2. Attach the supplied seal stripe to the

lower edge of the hob along the

outer edge of the glass ceramic. Do

not extend it. Make sure that the

ends of the seal stripe are located in

the middle of one side of the hob.

3. Add some mm when you cut the seal

stripe to the length.

4. Push the two ends of seal stripe

together.

ENGLISH

21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare