AEG 600 M Bedienungsanleitung PDF herunterladen (Seite 10)

1. Operating Instructions

RTi 600 M HF

The RTi 600 M HF room temperature regulator is a mechanical two-position controller. When the

room temperature is too low, the fans of the storage heater in the RTi 600 M HF are switched on

automatically and operated at constant speed.

On reaching the room temperature set on the room temperature regulator, the fans are switched

off automatically by the RTi 600 M HF.

1.1 Functional Principle

The capillary tube thermostat measures the room temperature and switches the fan ON or OFF

accordingly. The desired room temperature can be set continuously with the selector knob on the

control panel.

If the selector knob is in the middle position, the room temperature is controlled constantly to

approx. 20 °C. By turning the selector knob to the left or right, the room temperature can be set

between about 7 °C and 30 °C.

When the room temperature drops below the set value, the room temperature regulator

automatically switches on the storage heater fan motors so that the stored heat is blown into the

room.

On very cold days it is advisable to leave the room temperature regulator switched on during long

periods of absence (several days) to keep the temperature at about 10 °C for example so that the

building or room does not go cold (protection against frost).

A day-acting element (supplied as an accessory) in the storage heater can be switched by means of

the illuminated rocker switch. The switch lights up when the DAE is in operation.

A night-time set back of ca. 3K can be achieved by a control current on terminal TA, for instance

by a manual switch, time-clock or central control

For the User

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 25 26

Keine Kommentare

AEG 600 M Bedienungsanleitung Seite 10