AEG 11126GR-MN Bedienungsanleitung PDF herunterladen (Seite 28)

7. Screw on slowly the bypass screw till

the flame becomes minimum and

stable.

8. Put the knob for the oven functions

back.

9. Set the maximum gas flow position

on the knob for the oven functions

and let the oven heat for at least 10

minutes.

10. Quickly turn the knob for the oven

functions from maximum to the

minimum gas flow position.

Control the flame. Make sure the flame

does not go out when you turn the knob

to the minimum gas flow position. There

must be a small regular flame on the

oven burner crown. If the flame goes out

adjust the oven burner again.

14.15 Gas grill injector

replacement

1. Release the screws which keep the

grill burner in position A.

A

2. Release the burner injector with a 7

mm socket spanner and replace it

with a right one.

3. Assemble the burner in a reverse

sequence. Before you fix the screw,

make sure that the burner is pushed

correctly to the back panel.

Test the grill injectors.

14.16 Levelling of the

appliance

Use small feet on the bottom of

appliance to set the appliance top

surface level with other surfaces.

14.17 Electrical installation

WARNING!

The manufacturer is not

responsible if you do not

follow the safety precautions

from Safety chapters.

This appliance is supplied with a main

plug and a main cable.

WARNING!

The power cable must not

touch the part of the

appliance shown in the

illustration.

www.aeg.com28

1 2 ... 23 24 25 26 27 28 29 30 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare