AEG FSB41600Z Bedienungsanleitung PDF herunterladen (Seite 9)

Whether you use a standard detergent

or multi-tabs (with or without salt), set

the proper water hardness level to

keep the salt refill indicator active.

Multi-tabs containing salt

are not effective enough to

soften hard water.

How to set the water softener

level

The appliance must be in programme

selection mode.

1. To enter the user mode, press and

hold simultaneously and

until the indicators ,

, and flash and

the display is blank.

2. Press

.

• The indicators

,

and are off.

• The indicator still flashes.

• The display shows the current

setting: e.g.

= level 5.

3. Press repeatedly to change the

setting.

4. Press the on/off button to confirm

the setting.

6.3 The rinse aid empty

notification

The rinse aid helps to dry the dishes

without streaks and stains.

The rinse aid is automatically released

during the hot rinse phase.

When rinse aid chamber is empty, the

rinse aid indicator is turned on notifying

to refill rinse aid. If the drying results are

satisfactory while using multi-tablets

only, it is possible to deactivate the

notification for refilling rinse aid.

However, for best drying performance,

always use rinse aid.

If standard detergent or multi-tablets

without rinse aid are used, activate the

notification to keep the rinse aid refill

indicator active.

How to deactivate the rinse

aid empty notification

The appliance must be in programme

selection mode.

1. To enter the user mode, press and

hold simultaneously

and

until the indicators ,

, and start

flashing and the display is blank.

2. Press

.

•

The indicators

, and

are off.

• The indicator still flashes.

• The display shows the current

setting.

–

= rinse aid empty

notification activated.

–

= rinse aid empty

notification deactivated.

3. Press to change the setting.

4. Press on/off to confirm the setting.

6.4 Acoustic signals

Acoustic signals sound when a

malfunction of the appliance occurs. It is

not possible to deactivate these acoustic

signals.

There is also an acoustic signal that

sounds when the programme is

completed. By default this acoustic

signal is deactivated but it is possible to

activate it.

How to activate the acoustic

signal for the end of

programme

The appliance must be in programme

selection mode.

1. To enter the user mode, press and

hold simultaneously and

until the indicators ,

, and flash and

the display is blank.

2. Press

.

ENGLISH

9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare