AEG T75175AV Bedienungsanleitung PDF herunterladen (Seite 20)

15.3 Load door reversal

WARNING!

Before changing the door

stop, disconnect the mains

plug.

Note regarding contact

protection: The appliance is

only secure for operations

again once all plastic parts

have been put.

1. Open load door.

2. Unscrew hinge A from the front of

the appliance and remove the load

door.

3. Remove cover plates B. To do this,

put a thin screwdriver into the slots

as shown in the illustration, push

down lightly and remove the cover

plates.

4. Use an applicable tool and apply

pressure to unlock part C, remove

and turn it through 180°, then put on

the other side. There is a small spring

below locking block C. To put all

parts together correctly, look at the

illustrations:

5. Unscrew hinge A from the load door

and turn it through 180°, then put on

the opposite side and screw down.

6. Turn cover plates B through 180° and

put them on the opposite side.

7. Unscrew cover plates D from the

front of the appliance, turn through

180° and screw down on the

opposite side.

www.aeg.com

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 43 44

Keine Kommentare

AEG T75175AV Bedienungsanleitung Seite 20