AEG L88409FL2 Bedienungsanleitung PDF herunterladen (Seite 16)

10. DAILY USE

WARNING!

Refer to Safety chapters.

10.1 Using weight sensors

For a correct operation of

the weight sensor, activate

the appliance and set the

programme BEFORE you

put the laundry in the drum.

10.2 Before activating the

appliance

1. Open the water tap.

2. Connect the mains plug to the mains

socket.

10.3 Activating the appliance

and setting a programme

1. Press button Auto Off to activate the

appliance.

2. Turn the programme knob to the

necessary programme.

The programme indicator comes on.

The indicator of Start/Pause button

flashes with red colour.

The display shows the default

temperature and spin and the empty

indicator bars of the available functions.

3. If it is necessary, press Temperature

button and Spin button to change

the water temperature and the spin

speed.

4. If necessary, press the related

buttons to add some functions or to

set a delayed start.

The display shows the symbol of the set

function and the digit shows the delayed

time.

10.4 Loading the laundry

1. Open the appliance door.

The display shows the maximum load for

the programme and the weight of the

laundry

.

2. Put the laundry in the drum, one item

at time. Shake the items before you

put them in the drum.

On the display the weight of the laundry

updates by steps of kg 0.5. The weight is

indicative and changes with the type of

the laundry.

If you put in the drum more

laundry than the maximum

load, the symbol and

the value start to flash.

You can wash your laundry

but the water and energy

consumption increase.

To have the best

consumption and washing

performance remove some

items until the symbols stop

to flash.

The overload indication is

available only for

programmes with a

maximum load lower than

the appliance maximum

load.

3. Close the door.

The value near the symbol on the

display shows the quantity of the

detergent to use.

This data is indicative and refers to the

detergent quantity for a maximum load

that the manufacturer recommends.

4. Make sure that no laundry stays

between the seal and the door.

There is a risk of water leakage or

damage to the laundry.

www.aeg.com

16

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare