USER MANUALEN User ManualWashing MachineL6FBG48S
4.2 Appliance overview1 2 39567410811 121Worktop2Detergent dispenser3Control panel4Door handle5Rating plate6Drain pump filter7Feet for levelling the a
1Programme dial2Display3Eco touch button4Time Save touch button5Rinse touch button• Extra Rinse option• Skipping wash phase - Only rinse6Start
Child safety lock indicator.Energy saving indicators. The indicator appears by selecting aprogramme for cotton at 40 °C or 60 °C.Temperature indicat
The display shows the indicator .The door stays locked and the drumturns regularly to reduce creasing.You must drain the water to unlockthe door.If y
If you select the Cottonprogramme at 40°C or 60°Cand no other options are set,the display shows theindicator ; these arethe standard cottonprogrammes
Programme Programme descriptionSyntheticsSynthetic items or mixed fabric items. Normal soil.DelicatesDelicate fabrics such as acrylics, viscose and mi
Programme Programme descriptionSportsSynthetic and delicate itemsDrain/SpinTo spin the laundry and to drain the water in the drum. All fab-rics, excep
Programme Default tempera-tureTemperaturerangeMaximum spin speedSpin speed rangeMaximum loadDrain/Spin 3) 1400 rpm1400 rpm 8 kg1) Washing programme.2)
ProgrammeCottons Synthetics Delicates Wool/SilkAnti-Allergy 20 min. - 3 kg Outdoor Duvet Sports Drain/Spin Soft Plus 1) This option
8.3 Permanent Extra Rinse With this option you can permanentlyhave an extra rinse when you set a newprogramme.• To activate/deactivate this optiontouc
CONTENTS1. SAFETY INFORMATION...32. SAFETY INSTRUCTIONS...
10.3 Filling the detergent andadditivesCompartment for prewash phase,soak programme or stain remover.Compartment for washing phase.Compartment for liq
With the flap in theposition DOWN:• Do not usegelatinous or thickliquid detergents.• Do not put moreliquid detergent thanthe limit shown onthe flap.•
The programme starts, the door islocked. The display shows the indicator.The drain pump can operateshortly before the appliancefills water.10.8 The Pr
Now, you can set a new washingprogramme.If the ProSense phase isalready carried out and thewater filling is alreadystarted, the new programmestarts wi
10.15 Stand-by optionThe Stand-by function automaticallydeactivates the appliance to decreasethe energy consumption when:• You do not use the applianc
• Do not mix different types ofdetergents.• To help the environment, do not usemore than the recommended quantityof detergent.• Follow the instruction
12.4 Door sealRegularly examine the seal and removeall objects from the inner part.12.5 Cleaning the drumRegularly examine the drum to preventrust par
12.7 Cleaning the drain pumpWARNING!Disconnect the mains plugfrom the mains socket.Regularly check the drainpump filter and make surethat it is clean.
127. Close the drainage duct and turn thefilter anti-clockwise to remove it.128. If it is necessary, remove fluff andobjects from the filter recess.9.
1232. Remove the inlet hose from theappliance by loosening the ring nut.3. Clean the valve filter on the back ofthe appliance with a toothbrush.4. Whe
1. SAFETY INFORMATIONBefore the installation and use of the appliance,carefully read the supplied instructions. Themanufacturer is not responsible f
persists, contact the Authorised ServiceCentre.In case of major problems, the acousticsignals operate, the display shows analarm code and the Start/Pa
Problem Possible solutionThe appliance does notfill with water properly.• Make sure that the water tap is open.• Make sure that the pressure of the wa
Problem Possible solutionThe programme durationincreases or decreasesduring programme exe-cution.• The ProSense function is able to adjust the program
Programmes Load(kg)Energyconsump-tion (kWh)Waterconsump-tion (litre)Approxi-mate pro-grammeduration(minutes)Remain-ing mois-ture (%)1)Synthetics 40°C
Spin Speed Maximum 1400 rpm1) Connect the water inlet hose to a water tap with a 3/4'' thread.16. ACCESSORIES16.1 Available inwww.aeg.com/sh
ENGLISH 35
www.aeg.com/shop192943600-A-162017
• The appliance must be connected to the water mainsusing the new supplied hose sets, or other new hosesets supplied by the Authorised Service Centre.
electrical ratings of the mains powersupply.• Do not use multi-plug adapters andextension cables.• Make sure not to cause damage tothe mains plug and
1. Use a cutter to cut through externalfilm.2. Remove the external film.3. Remove the cardboard top and thepolystyrene packaging materials.4. Open the
10. Remove the three bolts by using thekey supplied with the appliance.11. Pull out the plastic spacers.12. Put the plastic caps, that you find inthe
20O20O45O45OMake sure that the inlet hoseis not in vertical position.3. If necessary, loose the ring nut to setit in the correct position.4. Connect t
The end of the drain hosemust always be ventilated ,i.e. the inner diameter of thedrain pipe (min. 38 mm -min. 1.5") must be largerthan the exter
Kommentare zu diesen Handbüchern