AEG KS8404021M Bedienungsanleitung PDF herunterladen (Seite 14)

– When the heating function or pro-

gramme operates, the heating ele-

ments are deactivated 10% earlier

(the lamp and fan continue to oper-

ate). For this feature to operate, the

cooking time must be longer than

30 minutes or you must use the

clock functions ( Duration , End

Time ).

– When the appliance is off, you can

use the heat to keep food warm.

The display shows the remaining

temperature.

• Cooking with the lamp off - touch

and hold

for 3 seconds to deacti-

vate the lamp during cooking.

• When you use the Moist Fan Baking

function, the lamp deactivates after 30

seconds. The lamp activates again

when you touch

for 3 seconds or

when you open the appliance door.

• Eco functions - refer to section "Heat-

ing Functions" (for selected models

only).

7. CLOCK FUNCTIONS

Symbol Function Description

Minute Minder

To set a countdown (max. 2 h 30 min). This func-

tion has no effect on the operation of the appli-

ance. Use

to activate the function. Press or

to set the minutes and OK to start.

Duration

To set how long the appliance has to be in opera-

tion (max. 23 h 59 min).

End Time

To set the switch-off time for a heating function

(max. 23 h 59 min).

If you set the time for a clock function,

the time starts to count down after 5 sec-

onds.

If you use the clock functions Du-

ration and End Time , the appli-

ance deactivates the heating ele-

ments after 90 % of the set time.

The appliance uses the residual

heat to continue the cooking

process until the time ends (3 -

20 minutes).

Setting the clock functions

1.

Set a heating function.

2.

Press again and again until the

display shows the necessary clock

function and the related symbol.

3.

Press or to set the necessary

time. Press OK to confirm. When the

time ends, an acoustic signal

sounds. The appliance deactivates.

The display shows a message.

4.

Press a sensor field to stop the sig-

nal.

Useful information:

• With Duration and End Time you must

set the heating function and the tem-

perature first. Then you can set the

clock function. The appliance deacti-

vates automatically.

• You can use Duration and End Time at

the same time, if you want to automat-

ically activate and deactivate the ap-

pliance on a given time later.

• When you use the Core Temperature

Sensor (if applicable), the Duration

and End Time functions do not work.

7.1 Heat + Hold

The Heat + Hold function keeps pre-

pared food warm at 80 °C for 30 mi-

nutes. It activates after the baking or

roasting procedure ends.

• You can activate or deactivate the

function in the Basic Settings menu.

• Conditions for the function:

14

www.aeg.com

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare