AEG BSE792220M Bedienungsanleitung PDF herunterladen (Seite 59)

Problem Possible cause Remedy

The descaling procedure is

interrupted before it finishes.

There was a power cut. Repeat the procedure.

The descaling procedure is

interrupted before it finishes.

The function was stopped by

the user.

Repeat the procedure.

There is no water inside the

grill- / roasting pan after the

descaling procedure.

You did not fill the water

drawer to the maximum lev-

el.

Check if the a descaling

agent / water is present in

the water drawer body.

Repeat the procedure.

There is dirty water on the

bottom of the cavity after

the descaling cycle.

The grill- / roasting pan is on

a wrong shelf position.

Remove the residual water

and the descaling agent

from the bottom of the

oven. Put the grill- / roasting

pan on the first shelf posi-

tion.

The cleaning function is in-

terrupted before it finishes.

There was a power cut. Repeat the procedure.

The cleaning function is in-

terrupted before it finishes.

The function was stopped by

the user.

Repeat the procedure.

There is too much water on

the bottom of the cavity af-

ter the end of the cleaning

function.

You sprayed too much de-

tergent in the appliance be-

fore the activation of the

cleaning cycle.

Cover all parts of the cavity

with a thin layer of the deter-

gent. Spray the detergent

evenly.

There is no good perform-

ance of the cleaning proce-

dure.

The initial oven cavity tem-

perature of the steam clean-

ing function was too high.

Repeat the cycle. Run the cy-

cle when the appliance is

cold.

There is no good perform-

ance of the cleaning proce-

dure.

You did not remove the side

grids before the start of the

cleaning procedure. They

can transfer heat to the walls

and decrease the perform-

ance.

Remove the side grids from

the appliance and repeat the

function.

There is no good perform-

ance of the cleaning proce-

dure.

You did not remove the ac-

cessories from the appliance

before the start of the clean-

ing procedure. They can

compromise the steam cycle

and decrease the perform-

ance.

Remove the accessories

from the appliance and re-

peat the function.

13.2 Service data

If you cannot find a solution to the

problem yourself, contact your dealer or

an Authorised Service Centre.

The necessary data for the service centre

is on the rating plate. The rating plate is

on the front frame of the appliance

cavity. Do not remove the rating plate

from the appliance cavity.

ENGLISH 59

1 2 ... 54 55 56 57 58 59 60 61 62 63 64

Kommentare zu diesen Handbüchern

Keine Kommentare