AEG BOGESM Bedienungsanleitung PDF herunterladen (Seite 14)

and the time setting flash in the display.

The appliance deactivates.

4. Touch a sensor field or open the

oven door to stop the acoustic

signal.

5. Deactivate the appliance.

7.5 Setting the SET+GO

You can use the SET+GO function only

when the DURATION is set.

1. Set an oven function (or a

programme) and temperature (refer

to "Setting the oven function" and

"Changing the temperature").

2. Set the DURATION (refer to "Setting

the DURATION").

3. Touch again and again until

flashes in the display.

4. Touch

to set the SET+GO

function.

The display shows and with an

indicator. This indicator shows which

clock function is activated.

5. Touch a sensor field (apart from ON /

OFF) to start the SET+GO function.

7.6 Setting the MINUTE

MINDER

Use the MINUTE MINDER to set a

countdown (maximum 23 h 59 min). This

function has no effect on the operation

of the oven. You can set the MINUTE

MINDER at any time and also when the

appliance is off.

1. Touch

.

and "00" flash in the display.

2. Use or to set the MINUTE

MINDER. First you set the seconds,

then the minutes and the hours.

3. Touch

or the MINUTE MINDER

starts automatically after five

seconds.

When the set time ends, an acoustic

signal sounds for two minutes and 00:00

and

flash in the display.

4. Touch a sensor field or open the

oven door to stop the acoustic

signal.

7.7 Setting the Time delay

function

The DURATION and END can be

used at the same time, if the appliance is

to be switched on and off automatically

later. In this case, first set the DURATION

and then the END function (refer

to "Setting the DURATION" and

"Setting the END" ).

When the Time delay

function is activated, the

display shows a static

symbol of the oven function,

with a dot and . The

dot shows which clock

function is on in the Clock /

residual heat display.

8. AUTOMATIC PROGRAMMES

WARNING!

Refer to Safety chapters.

There are 25 automatic programmes.

The display shows the shelf position and

the default cooking times for all

automatic programmes. You can find the

recipes for the automatic programmes in

the "Recipe book".

8.1 Automatic programmes

1. Activate the appliance.

2. Touch

.

The display shows , a symbol and the

number of the automatic programme.

3. Touch or to choose the

automatic programme.

4. Touch or wait five seconds until

the appliance automatically starts to

work.

5. When the set time ends, an acoustic

signal sounds for two minutes. The

symbol flashes.

The appliance deactivates.

6. Touch a sensor field or open the

door to stop the acoustic signal.

www.aeg.com

14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare