AEG HG65NM4320 Bedienungsanleitung

EN User ManualHobHG654320HG65NM

6.5 Periodic maintenanceSpeak to your local Authorised ServiceCentre periodically to check theconditions of the gas supply pipe andthe pressure adjust

7.3 Labels supplied with theaccessories bagStick the adhesive labels as indicatedbelow:MOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NO.

However, if the room has a door whichopens directly to the outside no air ventis required even if the volume is between5 m³ and 11 m³.If there are oth

8.4 Injectors replacement1. Remove the pan supports.2. Remove the caps and crowns of theburner.3. With a socket spanner 7 remove theinjectors and repl

Before carrying out the connection,make sure:1. The limiter valve and the electricalsystem can take the appliance load(see the rating plate)2. The sup

8.8 Building Inmin. 600 mmmin. 55 mmmin. 650 mm560 mm480 mmmin. 150 mm30 mm10 mm3 mm11 mm11 mmAABA. supplied sealB. supplied bracketsCAUTION!Install t

9.3 Other technical dataTOTAL POWER:Gas original: G20 (2H) 20 mbar = 8 kWGas replacement: G30 (3+) 28-30 mbar = 567 g/hG31 (3+) 37 mbar = 557 g/hElect

Energy efficiency per gas burner(EE gas burner)Left rear - Semi-rapid 53.7%Right rear - Rapid 53.7%Left front - Semi-rapid 52.0%Right front - Auxiliar

www.aeg.com18

ENGLISH 19

CONTENTS1. SAFETY INFORMATION...32. SAFETY INSTRUCTIONS.

www.aeg.com/shop867305785-D-412015

1. SAFETY INFORMATIONBefore the installation and use of the appliance,carefully read the supplied instructions. Themanufacturer is not responsible i

• Do not store items on the cooking surfaces.• Metallic objects such as knives, forks, spoons and lidsshould not be placed on the hob surface since th

• Before carrying out any operationmake sure that the appliance isdisconnected from the power supply.• Make sure that the electricalinformation on the

heated objects away from fats and oilswhen you cook with them.• The vapours that very hot oil releasescan cause spontaneous combustion.• Used oil, tha

3. PRODUCT DESCRIPTION3.1 Cooking surface layout23411Semi-rapid burner2Rapid burner3Auxiliary burner4Control knobs3.2 Control knobSymbol Descriptionno

lets the thermocouple warm up. Ifnot, the gas supply is interrupted.3. Adjust the flame after it is regular.If after some tries the burnerdoes not lig

CAUTION!Make sure that the pots areplaced centrally on theburner in order to getmaximum stability and toget lower gas consumption.5.2 Diameters of coo