AEG HC411520GB Bedienungsanleitung PDF herunterladen (Seite 14)

min.

30 mm

min. 20 mm

• Seal the gap between the worktop

and glass ceramic with silicone.

• Put some soapy water on the silicone.

• Pull off the excess silicone with the

scraper.

8.7 The installation of more

than one appliance

Added parts:connection bar(s), heat re-

sistant silicon, rubber shape, sealing

strap.

Only use special a heat - resistant

silicon.

The worktop cut out

Distance from the wall : minimum 50 mm

Depth : 490 mm

Width : sum widths of all the appliances

to be built-in and subtract 20 mm (see

also "Overview of all appliance widths" )

Example :

580 mm

520 mm

490 mm

360 mm

+-=

20 mm 920 mm

The installation of more than one appli-

ance

1.

Put down the dimension of the work-

top cut out and saw it out.

2.

Put the appliances one at time on

some soft surface, a blanket for ex-

ample, with the bottom side up.

3.

Put the seal stripe around the lower

edge of the appliance along the out-

er edge of the glass ceramic.

4.

Loosely screw the fixing plates into

the appropriate holes in the protec-

tive casing.

5.

Put the first appliance in the worktop

cut out. Put the connection bar in

the worktop cut out and push up

half of the width against the appli-

ance.

6.

Loosely turn in fixing plates from be-

low on the worktop and on the con-

nection bar.

7.

Put the subsequent appliance in the

worktop cut out . Make sure that the

14

www.aeg.com

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare