USER MANUALEN User ManualDishwasherFFE83700PM

5.2 Information for testinstitutesTo receive the necessary information forconducting performance tests (e.g.according to EN60436), send an email to:in

Water hardnessGerman de-grees (°dH)French degrees(°fH)mmol / l Clarke de-greesWater softener lev-el47 - 50 84 - 90 8.4 - 9.0 58 - 63 1043 - 46 76 - 83

– = the rinse aid emptynotification is deactivated.– = the rinse aid emptynotification is activated.2. Press Start to change the setting.3. Press on

7. OPTIONSDesired options must beactivated every time beforeyou start a programme.It is not possible to activateor deactivate options while aprogramme

hardness of the water supply. Ifnot, adjust the level of the watersoftener.2. Fill the salt container.3. Fill the rinse aid dispenser.4. Open the wate

Fill the rinse aid dispenserwhen the indicator (A) isclear.9. DAILY USE1. Open the water tap.2. Press the on/off button to activatethe appliance.Make

If the door is opened formore than 30 secondsduring the drying phase, therunning programme ends. Itdoes not happen if the dooris opened by AirDryfunct

• In areas with hard and very hard waterwe recommend to use plaindishwasher detergent (powder, gel,tablets containing no additionalagents), rinse aid

11. CARE AND CLEANINGWARNING!Before maintenance,deactivate the appliance anddisconnect the mains plugfrom the main socket.Dirty filters and cloggedspr

CAUTION!An incorrect position of thefilters can cause badwashing results and damageto the appliance.11.2 Cleaning the upper sprayarmWe recommend to cl

CONTENTS1. SAFETY INFORMATION...22. SAFETY INSTRUCTIONS...

limescale buildup inside theappliance. Run long-durationprogrammes at least twice a month toprevent the buildup.12. TROUBLESHOOTINGWARNING!Improper re

Problem and alarm code Possible cause and solutionThe programme lasts toolong.• If the delay start option is set, cancel the delay setting orwait for

Problem Possible cause and solutionPoor drying results. • Tableware has been left for too long inside the closedappliance.• There is no rinse aid or t

Problem Possible cause and solutionLimescale deposits on the ta-bleware, on the tub and onthe inside of the door.• The level of salt is low. Check the

Drying efficiency class on a scale from G (least efficient)to A (most efficient)AThe ‘standard programme’ is the standard cleaning cy-cle to which the

ENGLISH 25

www.aeg.com26

ENGLISH 27

www.aeg.com/shop117882251-A-492018

manufacturer is not responsible for any injuries ordamages that are the result of incorrect installation orusage. Always keep the instructions in a sa

• If the supply cord is damaged, it must be replaced bythe manufacturer, its Authorised Service Centre orsimilarly qualified persons in order to avoid

• Do not pull the mains cable todisconnect the appliance. Always pullthe mains plug.• This appliance complies with theE.E.C. Directives.• UK and Irela

3. PRODUCT DESCRIPTION65911 10 7812 13 34211Worktop2Top spray arm3Upper spray arm4Lower spray arm5Filters6Rating plate7Salt container8Air vent9Rinse a

4. CONTROL PANEL12 4 5378 61On/off button2Program touch button3Programme indicators4Display5Delay touch button6Option touch button7Indicators8Start to

Indicator DescriptionExtraHygiene indicator.5. PROGRAMMESThe order of the programmes in thetable may not reflect their sequence onthe control panel.Pr

Programme Degree of soilType of loadProgramme phases Options 8)• Normal soil• Crockery andcutlery• Prewash• Wash 50 °C• Rinses• Dry• XtraDry1) This pr