AEG 222DW Bedienungsanleitung

222 DFume Extractor HoodInstallation and Operating Instructions

10Wall unit mounting● Make the holes on the bottom of the cupboard, usingthe drilling template .● From inside the cupboard, insert the 4 supplied sc

11Wall mounting● Fix the drilling template to the wall.● Make 3 Ø 8mm holes in the wall 2 at points I, 1 as desired atpoints L.● Insert the three Ø

12Hood Operation● The hood is fitted with a variable speed motor. The mosteffective use of the hood is obtained by switching it on a fewminutes befor

13● Never leave a cooking hob or ring on without a pot or pan ontop of it, to avoid the possibility of excess heat damaging theunit. Gas, oil in parti

146Maintenance and care● The hood must always be disconnected from the mainspower supply before beginning any maintenance work.Opening the grid● Ope

158Removing the filterOpen the grid and remove the stops M to take out the filter. SeeFig. 7.Carbon filter● The activated carbon filter should only

16Warning● Failure to observe the instructions on cleaning the unit andchanging the filters will cause a fire hazard. You are thereforestrongly recomm

17What to do ifIf your appliance fails to work properly please carry out the following checks.Symptom SolutionThe cooker hood will not start... Check

18Service and spare partsIn the event of your appliance requiring service, or if you wish topurchase spare parts, contact your local AEG Service Force

19

2Printed on recycled paper.AEG  putting words into action.

LI02GB Ed. 05/02AEG Hausgeräte GmbHPostfach 1036D-90327 Nürnberghttp://www.aeg.hausgeraete.de© Copyright by AEG

3ContentsIntroduction 4Extraction mode 4Recirculation mode 5Electrical connections 6Technical details 7Installation 8Safety warnings for kitchen uni

42IntroductionExtraction mode● The hood is supplied as an extractor unit and can also be used with afiltering function by fitting activated carbon fi

5● Move the lever L to position A  Fig. 3.● When connecting up the hood using a telescopic wall pipe,you should use an uninflammable outlet hose ABS

6Electrical connection220-240 V - using fixed power supply line with plug.(The unit should only be connected up by an authorized electrician).Your ap

7Technical detailsDimensionsHeight x Width x Depth (in cm) 13 x 59,9 x 51WeightNet: 6,9 kgGross: 7,8 kgMaximum absorbed power: 205 WMotor absorption

8InstallationSafety warnings for kitchen unit installer● When used as an extractor unit, the hood must be fitted with a120mm diameter hose.● If t

9● The national decree on fuel-burning systems specifies a maximumdepression of 0.04 bar in such rooms.● Hoods can only be used safely with appliances